Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
137
Record control settings
Configure record control parameters. See Table 4-46.
Table 4-46 Record control parameter description
Parameters Description
Pack Duration The duration of each file pack.
Pre-event Record
The time period for which the system records video before alarm, if the
value is 5, then the system records video for 5 seconds before alarm starts
and save it.
If the Record Mode is Off and the record activity has been linked with
alarm or motion detection, the system will still save the pre-event video.
Disk Full
The recording strategy when the disk is full.
Stop: The system stops recording when the disk is full.
Overwrite: T
he system overwrites the oldest files and keep
recording when the disk is full.
Record Mode
At the record mode, if you select Manual, the system starts video
recording; if you select Auto, the system records video as time period
scheduled; if you select Off, video recording will not start.
Record Stream Includes main stream and sub stream.
Click Save.
System Management
4.8.1 General Settings
4.8.1.1 Configuring General Information
Configure Camera name, language and video standard.
Select Setting > System > General > General.
The General interface is displayed. See Figure 4-87.