Operation Manual
Table Of Contents
- Foreword
- 1 Product Introduction
- 2 Basic Settings
- 3 Daily Operation
- 3.1 Live
- 3.2 PTZ
- 3.2.1 Bullet Cameras
- 3.2.2 Speed Dome Cameras & Pan Tilt Cameras
- 3.2.2.1 Configuring Protocol
- 3.2.2.2 Configuring PTZ Functions
- 3.2.2.2.1 Configuring Preset
- 3.2.2.2.2 Configuring Tour
- 3.2.2.2.3 Configuring Scan
- 3.2.2.2.4 Configuring Pattern
- 3.2.2.2.5 Configuring Pan
- 3.2.2.2.6 Configuring PTZ Speed
- 3.2.2.2.7 Configuring Idle Motion
- 3.2.2.2.8 Configuring Power Up
- 3.2.2.2.9 Configuring Time Task
- 3.2.2.2.10 Restarting PTZ Manually
- 3.2.2.2.11 Restoring PTZ to the Default Settings
- 3.2.2.3 Operating PTZ
- 3.2.2.4 Configuring Preset Backup
- 3.3 Playback
- 3.4 Reports
- 3.5 Alarm
- 4 Setting
- 4.1 Configuring Camera
- 4.1.1 Configuring Lens
- 4.1.2 Configuring Video Parameters
- 4.1.3 Configuring Audio Parameters
- 4.2 Configuring Network
- 4.3 Peripheral
- 4.4 Smart Thermal
- 4.5 Event
- 4.6 Temperature Measuring Settings
- 4.7 Storage Management
- 4.8 System Management
- 4.1 Configuring Camera
- 5 System Maintenance
- 6 Additional Accessing Methods
- Appendix 1 Cybersecurity Recommendations
123
Illegal access
Select the Enable check box.
Configure illegal access parameters. See Table 4-38.
Table 4-38 Illegal access parameter description
Parameters Description
Login error
The number of times that the login password is allowed to be wrongly
entered for.
When the login password has been wrongly entered for more than the
set times, the account is locked. You need to wait 30 minutes before your
account is unlocked.
Relay-out
You can connect this relay-out port to such alarm Cameras as light and
siren. When an alarm is triggered, those alarm Cameras will work. Select
the check box to enable this function.
Alarm Delay
Set a length of time for the Camera to delay turning off alarm after an
event is actually ended.
Send Email
Select the Send Email check box and an e-mail will be delivered to the
Camera user once an alarm is triggered.
Set your e-mail first before enabling the Send Email function. See "4.2.5
Configuring SMTP" for detailed operations.
Click Save.
4.5.5.4 Configuring Lenses Anti-Burning
Configure the lenses’ anti-burning parameters and when the lenses are watching directly towards
the sun and face the potential burning, the camera will automatically turn to other positions to
avoid.
This function is supported on select models and the actual interface shall prevail.
Select Setting > Event > Abnormality > Burning Warning.
The Burning Warning interface is displayed. See Figure 4-67.