User Manual

Account & Permission Management

DVR User Manual

② Check “Enable” and then choose “Enable Allow List (white list)” or “Enable Block List

(black list)” (the PC client of which the IP address is in the allow list can access DVR remotely

while the PC client in the block list cannot).

③ Add IP/IP segment/MAC. Click “Add IP” or “Add MAC” and then check “Enable” in the

popup window (only if you check it can the IP/IP segment/MAC you add be effective). Enter

the IP/IP segment/MAC and then click “OK”. In the above interface, click to edit IP/IP

segment/MAC, click to delete it. Click “Apply” to save the settings.

10.5 Preview On Logout

Click StartSettingsAccount and AuthoritySecurityPreview On Logout to go to the

following interface.

Set a camera and then enable or disable the preview permission on logout as required. If a

camera’s preview permission on logout is “ON”, you can view the live image of the camera

when the system is logged out, or the live image of the camera cannot be seen when logged

out.