User Manual

Alarm Management

DVR User Manual

② Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,

“Pop-up Video” and “E-mail”. The alarm handling setting of intrusion detection alarm is

similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).

③ Click “Apply” to save the settings. You can click “Intrusion Config” to go to the intrusion

detection configuration interface.

9.4 Exception Alarm

9.4.1 IPC Offline Settings

① Click StartSettingsAlarmExceptionIPC Offline Settings to go to the interface as

shown below.

② Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”,

“Pop-up Message Box” and “E-mail”. The IPC Offline Settings are similar to that of the sensor

alarm (see 9.1 Sensor Alarm for details).

③ Click “Apply” to save the settings.