User Manual

Alarm Management

DVR User Manual

② Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,

“Pop-up Video” and “E-mail”. The alarm handling setting of exception detection alarm is

similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).

③ Click “Apply” to save the settings. You can click “Exception Config” to go to the

exception detection configuration interface.

9.3.3 Tripwire

Tripwire/Line Crossing Configuration:

Alarms will be triggered if someone or something crosses the pre-defined alarm line.

① Click StartSettingsCameraIntelligent DetectionTripwire to go to the following

interface.

② Select the camera, enable the line crossing detection and set the duration.

③ Select the direction.

Direction: A<->B, A->B and A<-B optional. It is the crossing direction of the intruder who

crosses over the alert line.

A<->B: the alarm triggers when the intruder crosses over the alert line from B to A or from A

to B.