User Manual

Device Management
DVR User Manual
103
the tool bar at the bottom of the live view interface to view network status conveniently.
11.2 Basic Configuration
11.2.1 Common Configuration
Click StartSettingsSystemBasicGeneral Settings to go to the following interface.
Set the device name, device No., language, video format and main output resolution. Enable or
disable wizard, “Log In Automatically”, “Log Out Automatically” (if checked, you can set the
wait time) “App Live Self-Adaption” and “Dwell Automatically” (if checked, you can set the
wait time). Click “Apply” to save the settings.
Device Name: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to the camera.
Spot: If the DVR supports spot output, you can enable spot output. Connect the spot output
device to the DVR and then set the spot output (see 5.2.4 Spot View for details).
Dwell Automatically: Switch automatically. Check it and set “wait time”.The system will
switch images automatically if it is not operated during the time you set.
11.2.2 Date and Time Configuration
Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.