User Manual for Wireless Microphone Cautions Please read & keep this manual carefully to make full use of the product!
System Illustration of Receiver 1.Power ON / OFF. 2.Battery indicator: Light on when charging; Off: Fully charged; Flashing: Low battery. 3.Connection status: Flashing: Transmitter & receiver are not paired; system will be powered off automatically if not paired more than 10 minutes. Light on: Transmitter & receiver are paired successfully. 4.Echo Indicator: Light on when echo is ready. 5.BT indicator: Flash: no device paired, and BT will be in sleep mode if no device paired in 5 mins, light off.
System Illustration of Transmitter 1.Cartridge: Point it to mount for better sound pickup. 2.Power / Mode switch: long press to power on/off, short press to MUTE. 3.Battery indicator: Light on when charging; Off: Fully charged; Flash: Low battery. 4.Connection status: Flashing: Transmitter & receiver are not paired; system will be powered off automatically if not paired more than 5 minutes. Light on: Transmitter & receiver are paired successfully. 5.
SETUP TIPS 1.Audio/Video recording with Smartphone a.Power both transmitter and receiver to pair successfully. b.Connect receiver to smartphone with included cable. c.Press volume control on transmitter to select models (Noise Reducing/ KTV), then start recording with desired Apps. 2.Livestream with Smartphone a.Power both transmitter and receiver to pair successfully. b.Connect receiver to smartphone with included cable. c.
System Parameter Polar Pattern: Omnidirectional Frequency Range: 2.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
