User's Manual

Table Of Contents

System Connection

1. Receiver Power Connection: Connect the DC connector of supplied AC/DC

adapter into the DC power input of receiver. Plug the AC input connecter into an

AC120/60Hz or AC220V/50Hz outlet. (Shown as below)

2. Antenna Connection: Install two antennas to the antenna input of receiver

res pec tive ly, k eep th e pos itio n of an tenn a at a 45 a ngle f rom v erti cal , then

tighten the screw.(Shown as below)

3. Audio Connection: Connect the corresponding output of receiver by supplied

1/4" phone jack audio cable or your XLR cable to the input of power amplifier or

mixer.(Shown as below)

Receiver Installation in 19 Inch Equipment Rack

Put the receiver into a suitable position of 19 inch equipment rack, tighten with

four fixed screw so that the receiver can be installed to the rack easily.