Technical data

M215 Installation and Operation
 2014 Enphase Energy Inc. All rights reserved. 141-00012 Rev 06
39
M215-60-2LL-S22, S23 or S24 Microinverter Parameters
Topic
Unit
Min
Typical
Max
Features and Specifications
Compatibility
Pairs with most 60-cell PV modules
Dimensions not including mounting bracket (approximate)
163 mm x 173 mm x 2.5 mm (6.4” x 6.8” x 1.0”)
Weight
3.4 Lbs (1.6 Kg)
Enclosure environmental rating
NEMA 6
Torque specifications for fasteners
(Do not over torque.)
 6 mm (1/4”) mounting hardware: 5 N m (45 to
50 in-lbs)
 8 mm (5/16”) mounting hardware: 9 N m (80
to 85 in-lbs)
Torque specification for 10/32 ground cleat
2 N m (20 to 25 in-lbs). Do not over torque.
Cooling
Natural convection: no fans
Communication
Power line
Standard warranty term
http://enphase.com/warranty
Compliance
UL1741, IEEE1547, FCC Part 15 Class B
CAN/CSA-C22.2 NO. 0-M91, 0.4-04, and 107.1-01
Integrated DC disconnect
The DC connector has been evaluated and
approved for use as the load-break disconnect
required by the NEC.
Integrated AC disconnect
The AC connector has been evaluated and
approved for use as the load-break disconnect
required by the NEC.
Engage Cable Specifications
Specification
Value
System temperature range (ambient)
-40ºC to +65ºC (-40ºF to 149ºF)
Cable temperature rating
90ºC Dry / 90ºC Wet
Cable type
TC-ER
Cable conductor insulator rating
THWN-2
Environmental protection rating
IEC 60529 IP67
UV exposure rating: terminator, engage coupler, and drop
connector body
UL 746 C, F1
Sunlight resistance (cable)
UL 1277
Compliance
UL486A/B, UL 514C, UL6703, UL 9703, IEC
60529 IP67, CAN/CSA 22.2 No. 21, 182.3
Conductor size
12 AWG
Cable diameter
208 VAC: 11.75mm (0.463")
240 VAC: 10.75mm (0.425”)
Minimum bend radius
4.75 inches (12 cm)
Drop connector dimensions
11.8 cm x 6.0 cm x 3.2 cm (4.64” x 2.36” x 1.25”)
Terminator cap dimensions
3.6 cm diameter x 5.1 cm tall (1.4” x 2”)