Technical data

M215 Installation and Operation

Build the Virtual Array

When the system is energized and the Envoy detects at least one microinverter, create the virtual array in

Enlighten from the installation map you created.

You can scan and upload the paper copy of the Installation Map, or you can use the ArrayGun feature

from the Enphase Installer Toolkit to easily build and configure a system. Refer to

http://enphase.com/products/arraygun/ for more information.

To scan and upload the map and build the array:

1. Scan the installation map and upload it to the Activation form online.

2. Use Array Builder to create the virtual array in Enlighten. Use your installation map as your

reference.

NOTE: Go to

http://enphase.com/support/videos/

to view the Array Builder demo.

3. If you do not already have an account, go to http://www.enphase.com and click “Enlighten

Once the virtual array is built, Enlighten displays a graphic representation of the PV system. It also shows

detailed current and historical performance information. Go to http://www.enphase.com for more

information on the Enphase Enlighten web-based monitoring and analysis.