Operating instructions

M215 Installation and Operation

Step 11 – Build the Virtual Array

When the system is energised and the Envoy detects all the installed microinverters, you can create the virtual

array in Enlighten from the installation map you created. Once the virtual array is built, Enlighten displays a

graphic representation of the PV system. It also shows detailed current and historical performance information.

Please go to http://www.enphase.com/uk

for more information on the Enphase Enlighten web-based

monitoring and analysis.

a. Scan the installation map and upload it to the Activation form online.

b. Use Array Builder to create the virtual array in Enlighten. Use the installation map created in step 10

as your reference.

NOTE: Go to

http://enphase.com/support/videos/

to view the Array Builder demo.

c. If you do not already have an account, go to http://www.enphase.com/uk

and click “Enlighten