Technical data

Page 5 Copyright Enphase Energy Inc. 2009 141-00008 REV 06
Important Safety Information
Read this First
This manual contains important instructions to follow during installation
and maintenance of the Enphase Envoy Communications Gateway (Envoy).
To reduce the risk of electrical shock, and to ensure the safe installation and
operation of the Envoy, the following safety symbols appear throughout this
document to indicate dangerous conditions and important safety
instructions.
WARNING: This indicates a situation where failure to follow
instructions may cause a serious hardware failure. Use extreme
caution when performing this task.
NOTE: This indicates information particularly important for optimal
system operation. Follow these instructions closely.
Safety Instructions
 Perform all electrical installations in accordance with all local electrical codes and
the National Electrical Code (NEC), ANSI/NFPA 70.
 Be aware that only qualified personnel shall install or replace the Enphase Envoy
Communications Gateway.
 Do not attempt to repair the Enphase Envoy; it contains no user-serviceable
parts. If the Enphase Envoy fails, please return the unit to your distributor for
maintenance. Tampering with or opening the Envoy will void the warranty.
 Before installing or using the Enphase Envoy, please read all instructions and
cautionary markings in the technical description and on the Enphase Envoy.
NOTE: For Enphase Envoy Warranty Terms and Conditions see the
Appendix on page 25 of this manual.