Technical data

Page 14 Copyright Enphase Energy Inc. 2009 141-00008 REV 06
The Envoy Initial Screen Displays
After the Envoy has completed the boot sequence it will scroll through 3 screens
initially, the home screen, communication check screen, activation screen.
The communication check screen will continue to display during the 7 day initial
period unless disabled through the panel menu or Admin page of the web interface.
The activate screen will continue to display during the 7 day initial period or until the
Envoy has been registered using the Enlighten on-line registration page.
The Envoy LCD Panel Menu
You can access the Envoy LCD panel menu using the Envoy Menu button. Press and
hold this button; after two seconds you will enter the Envoy menu. Continue holding
the Menu button and Menu items will appear in the following order:
To Activate Call:
1-877-797-4743
[▌▌▌ ] mm:ss +Web
LEVEL
D
evices: n
192.168.2.140 +Web
2407W 783kWh 25
Disable
New Device Scan
Enable
Communication Check
Enable
New Device Scan
Exit Menu