Technical data

Page 10 Copyright Enphase Energy Inc. 2009 141-00008 REV 06
Wall Mounting
To mount the Envoy on a wall:
1. Select a cool, dry, indoor location to locate the Envoy. Avoid heat
generating devices (wall heaters, toaster ovens, etc)
2. Use two drywall screws or wall anchors to affix the Envoy to the wall
mounted at the dimensions shown (not included in kit). Maximum screw
head diameter is .35”, A #8 screw is recommended.
3. Slide the Envoy onto the mounting screws aligning the Envoy screw holes
with the screws installed in step 2.