Technical data

Envoy Installation and Operation
Copyright  2012 Enphase Energy 141-00014 Rev 03
37
3. From the Admin menu, select Device Grid Configuration.
The Device Grid Configuration screen appears. This screen allows a licensed solar
professional to select and apply the appropriate trip points for the solar installation.
4. Select a Country regulatory specification.
5. Select a Grid profile that is applicable for your region.
6. Make note of the Envoy serial number and the authorization number on the screen. You will
need this information in the following steps.
7. Click the link to the Enlighten website. (If you do not already have an account, click Enlighten
Login at the Enlighten website to register.) Note that this link will not appear if the Envoy
shows “-Web”.
NOTE: If the Envoy displays “-Web”, see “Local Area Networking Troubleshooting” on page
30.
Click to select a
Country
regulatory
specification
Click to select a
Grid profile
Enter your token
here.
Click to Apply
Grid Profile