Technical data

Envoy Installation and Operation

Selecting a New Locale (Change Language Display)

You can set the LCD to display in English, French, Italian, or German. To do this:

1. Press and hold the Envoy Menu button. After two seconds you will enter the Envoy menu.

2. Continue holding the Menu button. When the LCD screen displays “Select New Locale”,

release the Menu button.

3. The Envoy LCD panel will scroll through the available locale settings. When you see the

setting you need, press the Menu button and hold for two seconds.

How the Envoy Works with Enlighten

The Envoy operates between the Enphase Microinverters and the Enphase Enlighten web-based

monitoring software. The Envoy collects energy and performance data from the microinverters and

forwards that data to Enlighten, via the Internet, for reporting.

Once you have registered the system and successfully installed the Envoy, Enphase will set up an

account for the site owner. You can then use Array Builder, a tool available to installers, to build the

virtual array. You will need to use the installation map you created during installation as a reference

during this task.

NOTE: To see the Array Builder demo, go to http://enphase.com/support/videos/.

If you do not already have an account, please go to www.enphase.com for more information.

When you complete the registration and installation, Enphase sends account information to the site

owner so that they can log in to the Enlighten website and view system performance.

Enlighten provides a wide range of information on system and PV module performance. A graphical

representation of the PV array provides “at a glance” information on the status of each PV module. You

can also access more detailed information, including current and lifetime performance metrics. You can

even access Enlighten on your mobile device and view current performance information wherever you

are.

English

Français

Deutsch

Italiano

Select New Locale