Technical data

Envoy Installation and Operation

The LCD screen then reads:

If a grid profile has not been applied, the following screen is displayed:

This indicates that the microinverters are not yet configured with a grid profile.

3. If needed, configure these settings as described in “Change or View the Grid Profile” on page

36.

If a grid profile has been applied, the following screens are displayed. You can press the

menu button at any time to exit this process.

Number of microinverters detected.

Number of microinverters that cannot be

set with a grid profile.

Number of microinverters that are set

with a grid profile and the name of the

specification being used.

Number of microinverters that are in the

process of being set and the name of the

specification being used.

Number of devices that failed to be set

with a grid profile.

Updating grid configuration data.

4. Press the menu button to exit this menu.

Checking grid config

Select to exit

(n)devices

have failed

(n)are propagating

with (local spec)

(n)devices are set

with (local spec)

(n)unsettable devices

(n) total devices

No Grid

Config. Applied

Gathering Grid

Configuration Data

View Grid

Configuration