Technical data

Envoy Installation and Operation
Copyright  2012 Enphase Energy 141-00014 Rev 03
18
10. Build the Virtual Array
When the system is energised and the Envoy detects at least one microinverter, the installer can begin to
create the virtual array in Enlighten from the installation map they created.
a. Log in to Enlighten.
b. Use Array Builder to create
the virtual array in
Enlighten.
c. Use your installation map
as your reference.
To see the Array Builder demo, go to
http://enphase.com/support/videos/.
Once the virtual array is built, Enlighten
displays a graphic representation of the
PV system. It also shows detailed
current and historical performance
information.
11. View System Performance in Enlighten
Once the array is built and the system is activated, the installer and the system owner can log in to
Enlighten to view site data.
a. If you have not done so already, log in to Enlighten to view system data.
b. Refer to “How the Envoy Works with Enlighten” on page 27 for more information.