Technical data

Envoy Installation and Operation

8. Wall Mount the Envoy (Optional)

NOTE: Before mounting the Envoy, it is best to perform a Communications check, as

described on page 23, to find the best location for your Envoy.

After you have positioned your Envoy for optimal communications and it is has begun to detect devices,

you can mount the Envoy on a wall. To do this:

a. Use two drywall screws or wall anchors (not included) to affix the Envoy to the wall, mounted

at the dimensions shown. You will need two #8 (4.17 mm or 0.16 in. diameter); maximum

screw head diameter is 8.9mm (0.35 in.).

b. Slide the Envoy onto the mounting screws, aligning the Envoy screw holes with the screws

installed in step a.