Technical data

Envoy Installation and Operation

Administration Screen

The Administration screen of the Envoy local interface contains a number of configurable options.

Click

Administration to access this menu.

NOTE: For Envoy performance reasons, Enphase does not recommend giving the

Envoy a publicly accessible IP address. However, if you must place the Envoy on a

public-facing IP address, Enphase recommends that you change the admin password

to disallow unauthorized modification to your Envoy.

(This situation is rare, since

consumer-grade routers normally provide the Envoy with an internal network IP

address that is not publicly accessible.)

For reference, private/internal IP address space will be in the 192.168.x.x, 172.16(-

31).x.x, 10.x.x.x or 169.254.x.x range. If you are unsure if your Envoy is on the public

Internet, please see your network administrator or Internet Service Provider.

The default log in credentials for the Administration menu are:

• Username: admin

• Password: admin

Administration Screen Tasks

Several Administration Screen tasks are described in the following sections. Perform these tasks

only when needed. Administration tasks include:

• Manage the Grid Profile

• Clear GFI Tripped Condition

• Set Device Scan Control

• Set Time Zone

• Other Admin Tasks