Technical data

Envoy Installation and Operation
Copyright  2012 Enphase Energy 141-00011 Rev 03
14
The normal, post installation boot sequence is shown:
Normal
Boot
Sequence
The last two screens alternate until the Communications Check ends, after 20 minutes.
The Envoy normally displays "-Web" for 2 to 3 minutes after the first start up. It then sends the first
report to Enlighten. If Enlighten responds, the Envoy displays +Web. Power production will show
as 0W and 0kWh until the microinverters are discovered and power production begins.
[e] Enphase Energy
Booting [||||||]
Starting R3.0.0
2011/06/06 16:21:20
169.254.120.1 -Web
2407W 783kWh 25

Comm Check -Web
Searching...
192.168.2.140 +Web
2407W 783kWh 25
[≡≡≡ ] mm:ss +Web
Level Devices: 25
INITIALIZING