User Manual

Planning for a Three-Phase IQ Microinverter System – North America

Splicing Q Cable and Raw Q Cable with Junction Boxes

For complex installations that include multiple arrays, it is possible to use

raw Q Cable (Q-12-RAW-300) to service the arrays and branch circuits that

originate directly at the primary roof mounted junction box. In the case that

Field Wireable Q Connectors are not readily available, you can use a small

junction box to splice two sections of Q Cable together or to splice Q Cable

to raw Q Cable.

The raw Q Cable is available in 300m (984ft) cable rolls (Q-12-RAW-300).

Terminate the raw Q Cable in one of the following manners:

• Into a junction box using a ½” service entrance (SE) strain reliefs

or UF cable glands

• With a Field Wireable Q Connector (male or female)