Component Guide

Planning an Ensemble Technology System – North America

Split systems that do NOT require additional Consumption CTs

For systems where the non-microgrid PV system is interconnected on the utility side of the primary microgrid Envoy’s

Consumption CTs, NO additional Consumption CTs are needed. See Figure 7 for this configuration.

Figure 7: “Split” PV system that does NOT require an additional set of Consumption CTs

M-Series microinverter systems support similar configurations for “split” PV systems. An example where non-microgrid

PV system is interconnected on the utility side of the microgrid Envoy’s Consumption CTs is shown below. No additional

consumption CTs are needed.

Figure 8: M-Series “split” PV system that does NOT require an additional set of Consumption CTs