Component Guide

Planning an Ensemble Technology System – North America

Bracket Spacing

Dimension

Description

Recommended Minimum

Enpower and Encharge horizontal bracket spacing

152 mm (6”)

B - Bottom aligned

Enpower wall mount bracket bottom to Encharge wall mount

bracket bottom

387 mm (15 1/4”)

B - Center aligned

Enpower wall mount bracket bottom to Encharge wall mount

bracket bottom

261 mm (10 5/16”)

B - Top aligned

Enpower wall mount bracket bottom to Encharge wall mount

bracket bottom

135 mm (5 5/16”)

Encharge wall horizontal bracket spacing

152 mm (6”)

Temperature Considerations

Unlike other battery chemistries, an Encharge storage system does not require ventilation for off-gassing and does

not require active cooling. Encharge storage system batteries perform best when not subjected to extreme hot or cold

temperatures and remain within the optimal temperature range of 0º C to 30º C (32º F to 86º F). Temperature may be

affected by location, exposure, and ventilation. Consider factors that may result in undesirable temperature swings

outside the optimal temperature range. For example, in enclosed unconditioned spaces such as garages or utility

closets, the temperature may be higher than the outdoor ambient.

Electrical Installation Requirements

For full installation instructions, always refer to the Enphase Installation Manuals, including the following documents:

• Quick Install Guide – Install the Enphase Encharge Storage System

• Quick Install Guide – Install the Enphase Enpower Smart Switch

Figure 11: Bracket Spacing