Datasheet
Zigbee Wireless Range Extender
The Zigbee Wireless Range Extender is an easy-to-install, plug & play Zigbee USB dongle
that can be used to extend the range of Enphase Zigbee Network established between the
IQ Gateway, the IQ System Controller (in grid agnostic systems only) and IQ Batteries. Simply
insert the Enphase Zigbee Wireless Range Extender dongle into the USB port of a
5V USB power block like ones used for charging cell phones. Power block not included.
© 2021 Enphase Energy. All rights reserved. Enphase, the Enphase logo, IQ8 microinverters,
and other names are trademarks of Enphase Energy, Inc. Data subject to change.
ZWRE-DS-0010-01-EN-US-2021-12-29
DATASHEET
Specications
SPECIFICATION NORTH AMERICA EMEA
SKU COMMS-24-EXT-01 COMMS-24-EXT-INT-01
Performance
Transmit Power Output (Nominal 25
o
C) 79 mW (+19 dBm) 6.3 mW (+8dBm)
RF Data Rate 250 Kbps
Receiver Sensitivity -103 dBm
Power Requirements
Supply Voltage 5V from USB power block
Transmit Current 145 mA 45 mA
Receive Current 26 mA
General
Frequency Band 2.4 GHz ISM
Dimensions (L x W x H) 2.29 in x 0.80 in x 0.44 in 5.83 cm x 2.03 cm x 1.12 cm
Operating Temperature -40º C to +85º C
Connector USB Type A
Antenna Internal
Regulatory Approvals
FCC Part 15.247 (USA) CE (EMEA)
IC (Canada)