Specifications Sheet

Enphase

Engage Cable System // DATA

To learn more about Enphase Microinverter technology,

visit enphase.com

CABLE TYPES / ORDERING OPTIONS

Voltage Connector Spacing PV Module Orientation Model Number #Connectors* Weight**

240 VAC, 4 conductors 1.025 meter (40”) Portrait ET10-240-BULK 240 221 lbs

240 VAC, 4 conductors 1.7 meter (67”) Landscape ET17-240-BULK 240 333 lbs

208 VAC, 5 conductors 1.025 meter (40”) Portrait ET10-208-BULK 240 221 lbs

208 VAC, 5 conductors 1.7 meter (67”) Landscape ET17-208-BULK 240 333 lbs

*additional lengths available through Enphase authorized distributors. **weights are approximate

CABLE SPECIFICATIONS

Description Rating

Cable temperature rating 90°C (194°F) wet/dry

Cable insulator rating THWN-2

UV exposure rating UL 746 C, F1

Conductor size 12AWG

Compliance IEC 60529 IP67, CAN/CSA 22.2 No. 21, 182.3, UL 486A/B, 514C, 6703, and 9703

Cable rating TC-ER

Cable Diameter 1.25 cm (0.49”)

Minimum bend radius 12 cm (4.75”)

ENGAGE ACCESSORIES

Branch Terminator

One terminator needed per branch

circuit

ET-TERM-10 (sold in packs of 10)

Disconnect Tool

Plan to use at least one per

installation

ET-DISC-05 (sold in packs of 5)

Watertight Sealing Cap

One needed to cover each unused

connector on the cabling

ET-SEAL-10 (sold in packs of 10)

Cable Clip

Many needed to fasten cabling

to the racking or to secure looped

cabling

ET-CLIP-100 (sold in packs of 100)

Engage Coupler

Used for splicing two power cables

within an array

ET-SPLK-05 (sold in packs of 5)