Cut Sheet
1. No enforced DC/AC ratio. See the compatibility calculator at https://enphase.com/en-us/support/module-compatibility.
2. CEC peak power tracking voltage range is 38 V to 43 V.
3. Maximum continuous input DC current is 10.2A.
4. Voltage range can be extended beyond nominal if required by the utility.
5. Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
To learn more about Enphase offerings, visit enphase.com
© 2021 Enphase Energy. All rights reserved. Enphase, the Enphase logo, Enphase IQ 7A, Enphase IQ Battery, Enphase Enlighten, Enphase IQ
Envoy, and other trademarks or service names are the trademarks of Enphase Energy, Inc. Data subject to change. 30-MAR-2021
INPUT (DC) IQ7A-72-M-US
Commonly used module pairings¹ 295 W–460 W +
Module compatibility 60-cell /120-half-cell and 72-cell /144-half-cell PV modules
Maximum input DC voltage 58 V
Power point tracking voltage range² 18 V–58 V
Min/Max start voltage 33 V / 58 V
Max DC short circuit current (module Isc)³ 15 A
Overvoltage class DC port II
DC port backfeed current 0 A
PV array conguration 1 x 1 ungrounded array; No additional DC side protection required;
AC side protection requires max 20A per branch circuit
OUTPUT (AC) @ 240 VAC @ 208 VAC
Peak output power 366 VA 295 VA
Maximum continuous output power 349 VA 290 VA
Nominal (L-L) voltage/range
4
240 V / 211–264 V 208 V / 183–229 V
Maximum continuous output current 1.45 A (240 VAC) 1.39 A (208 VAC)
Nominal frequency 60 Hz
Extended frequency range 47–68 Hz
AC short circuit fault current over 3 cycles 5.8 Arms
Maximum units per 20 A (L-L) branch circuit
5
11 (240 VAC) 11 (208 VAC)
Overvoltage class AC port III
AC port backfeed current 18 mA
Power factor setting 1.0
Power factor (adjustable) 0.85 leading ... 0.85 lagging
EFFICIENCY @240 VAC @208 VAC
CEC weighted efciency 97.0 % 96.5%
MECHANICAL
Ambient temperature range -40ºC to +60ºC
Relative humidity range 4% to 100% (condensing)
DC Connector type Staubli made MC4
Dimensions (HxWxD) 212 mm x 175 mm x 30.2 mm (without bracket)
Weight 1.1 kg (2.4 lbs)
Cooling Natural convection — No fans
Approved for wet locations Yes
Pollution degree PD3
Enclosure Class II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure rating NEMA Type 6 / outdoor
FEATURES
Communication Power Line Communication (PLC)
Monitoring Enlighten Manager and MyEnlighten monitoring options
Compatible with Enphase IQ Envoy
Disconnecting means The AC and DC connectors have been evaluated and approved by UL for use as the load-break
disconnect required by NEC 690.
Compliance CA Rule 21 (UL 1741-SA)
UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B,
CAN/CSA-C22.2 NO. 107.1-01
This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC-2014 and
NEC-2017 section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, for AC
and DC conductors, when installed according manufacturer’s instructions.
Enphase IQ 7A Microinverter with Integrated MC4 connectors