Envoy IQ Installation
Table Of Contents
- Enphase IQ Envoy
- Contact Information
- FCC Compliance
- Other Information
- This Class B digital apparatus complies with Industry Canada ICES-003.
- For third-party license information, refer to enphase.com/licenses.
- For Enphase patent information, refer to enphase.com/company/patents/.
- For warranty text, refer to enphase.com/warranty.
- Copyright © 2017 Enphase Energy Inc. All rights reserved.
- Audience
- Table of Contents
- SAFETY
- The Enphase IQ Envoy
- Installation Planning and Preparation
- Review the following pre-installation checks before you install the IQ Envoy.
- To install the production CT
- Installing the IQ Envoy – Part 1
- Installing the IQ Envoy – Part 2
- Use one of the following methods to detect devices (Enphase Microinverters and/or Enphase Batteries).
- IQ Envoy Operation
- You can track system installation progress with the Enphase Installer Toolkit mobile app.
- Connecting to IQ Envoy
- Once your mobile device and the Envoy are on the same LAN, you can connect to the IQ Envoy.
- Refer to enphase.com/installer-toolkit/ for more information on the Enphase Installer Toolkit.
- Select Diagnostic Tools to ping the Envoy, check network connectivity, and check the network route.
- Troubleshooting
- The following sections describe possible problems and solutions.
- Troubleshoot power line communication issues as follows.
- This means that communications from other Envoy(s) have been detected. To prevent this issue:
- Check for the following conditions.
- If Enphase Customer Support authorizes an IQ Envoy replacement (RMA), perform the following steps.
- Technical Data
IQ Envoy Installation and Operation
© 2017 Enphase Energy Inc. 141-00039 Rev 01
25
Connecting to IQ Envoy
There are several ways to connect with the IQ Envoy to check status or do configuration tasks:
•
•
•
Connect Using the Installer Toolkit App
The Enphase Installer Toolkit is a mobile app that provides installers with onsite system configuration
capabilities. Options for establishing a connection between the Installer Toolkit app and the IQ Envoy are:
•
•
IQ Envoy
Settings on your mobile device and then select Wi-Fi. Tap the
network you want to join from the list of available networks.
Method B: Create a Wireless Access Point
You can connect to the IQ Envoy without using the onsite router by creating a wireless Access Point (AP).
Use the built-in Wi-Fi functionality to do this. AP mode supports use of a mobile device and times out after
eight hours. The AP Mode LED lights solid green when AP mode is active. AP Mode allows you to connect
the IQ Envoy to Installer Toolkit so that you can track system installation progress.
To start an AP session:
-
-
AP Mode LED
AP Mode button