Manualshelf

Enphase IQ System Controller 2 install guide

ManualsBrandsEnphase Energy ManualsSolar & Wind PowerEnphase Power Kit that includes a IQ System Controller 2 and Rapid System shutdown Switch
12345678910
9
IQ System Controller 2 Quick Install Guide
Plan a location for the
IQ System Controller 2
Mounting the product
Section A
• It is recommended to install the product indoors, if the product is
installed outdoors it is recommended to be installed where there is
no direct exposure to sunlight.
• Install this product on the place where PV cables, smart meter
cables, grid cables and battery cables are easily accessible.
• This product is designed to be installed on the wall vertical only.
Do not install this product on the ground.
• The mounting surface must be able to suppor the weight of this
product (87 lbs).
• Appropriate operating tempraure is from -40 to 50 degrees celsius.
• Do not install this product in the place exposed to the direct
sunlight.
• Install the product in a clean, cool room.
• This product must not be installed or used at altitudes above
2500m.
• Do not install this product in places where ooding occurs.
-40°C
+50°C