Enphase IQ System Controller 2 install guide

IQ System Controller 2 Quick Install Guide

Tools needed

S. NO ITEM NAME QUANTITY SOURCE

1 CT-200-Split 2 IQ Combiner/Enphase Store

2 EP200G-HNDL-R1 (lifting handle) 1 Enphase Store

3 Eaton Breakers dierent ratings (described in Sec xxx) 4 Enphase Store/Retail outlets

4 Conduits (with ttings and Fitting tools) As required Provided by Installer

5 Drill 1 Provided by Installer

6 5/32 inch pilot bit 1 Provided by Installer

7 Screw driver 1 Provided by Installer

8 Wrench 1 Provided by Installer

9 Adjustable Wrench 1 Provided by Installer

10 Torque wrench 1 Provided by Installer

11 Level 1 Provided by Installer

12 5/32 inch Allen key 1 Provided by Installer

13 Conductor stripper 1 Provided by Installer

14 Electrician’s hole saw (2 inch) or punch set 1 Provided by Installer

15 Stud nder (if required) 1 Provided by Installer

16 Conduit ground hub rings 1 Provided by Installer

#10,1/4’’ or 5/16’’ lag bolts or screw 3’’ long

(depending on attaching wall) -

for each wall mount bracket

3 Provided by Installer