SDS

Enoz Moth Ice Crystals, EPA Reg. No. 1475-1 Revision Date 07-Nov-2019
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 11
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Do not touch or walk through spilled material. Stop leak if you can do it without risk. Evacuate
personnel to safe areas. Use personal protective equipment. Refer to Section 8 Avoid contact
with skin, eyes and clothing. Ensure adequate ventilation. Remove all sources of ignition. Take
precautionary measures against static discharges.
Other Information
Refer to protective measures listed in Section
s 7 and 8.
Environmental precautions
Environmental Precautions
Prevent entry into wa
terways, sewers, basements or confined areas. Refer to protective
measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so.
Methods and material for containment and cleaning up
Methods for Containment
Prevent dust cloud.
Methods for Cleaning Up
W
ith clean shovel place mater
ial into clean, dry container and cover loosely; move containers
from spill area. Take up with sand or other noncombustible absorbent material and place into
containers for later disposal. Take precautionary measures against static discharges. Pick up
and transfer to properly labeled containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
Do not breathe vapors, mist or gas. Wear personal protective equipment. Avoid contact with
skin and eyes. Keep away from heat, sparks and open flame. No smoking. Use only in area
provided with appropriate exhaust ventilation. Keep in an area equipped with sprinklers Use
according to package label instructions
Conditions for safe storage, including any incompatibilities
Storage
Keep away from heat and sources of ignition. Keep containers tightly closed in a cool, well-
ventilated place. Keep in properly labeled containers.
Incompatible Products
None known ba
sed on information supplied.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical Name ACGIH T
LV OSHA PEL NIOSH IDLH
p-Dichlorobenzene
106-46-7
TWA: 10 ppm TWA: 75 ppm
TWA: 450 mg/m
3
(vacated) TWA: 75 ppm
(vacated) TWA: 450 mg/m
3
(vacated) STEL: 110 ppm
(vacated) STEL: 675 mg/m
3
IDLH: 150 ppm
o-Dichlorobenzene
95-50-1
STEL: 50 ppm
TWA: 25 ppm
(vacated) Ceiling: 50 ppm
(vacated) Ceiling: 300 mg/m
3
Ceiling: 50 ppm
Ceiling: 300 mg/m
3
IDLH: 200 ppm
Ceiling: 50 ppm
Ceiling: 300 mg/m
3
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value. OSHA PEL: Occupational Safety and Health
Administration - Permissible Exposure Limits. NIOSH IDLH: Immediately Dangerous to Life or Health.
Other Exposure Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962
(11th Cir., 1992).