MSDS

Page 3 of 8
Conditions to Avoid: Contact with acids and oxidizing agents.
Hazardous Combustion Products: Produces oxides of carbon CO and CO
2
and may produce irritating
and toxic smoke and fumes.
Flash Point: Open cup: 174
0
F (79
0
C) Closed cup: 190
0
F (88
0
C)
Flammability Limits: Lower: 0.9% Upper: 5.9%
Autoignition Temperature: 526
0
C
SECTION 6: ACCIDENTAL RELEASE MEASURES
Pre-Entry Spill Procedure:
Shut off source of spill if it is safe to do so.
Review Section 3 - Hazards Identification and Section 8- Exposure Control/Personal Protection
before proceeding with the clean up.
Clean Up and Containment:
Scoop or shovel spilled material into suitable labeled containers with a tight fitting lid.
Secure the drum cover and move the container to a safe holding area.
Check area for residual material and repeat clean up if detected.
Environmental Concerns: None known.
Treatment and Disposal:
Decontaminate or dispose of all protective clothing and equipment.
See Section 13 - Disposal Recommendations for disposal information.
Reporting Requirements:
Report all releases which are likely to endanger the public health, harm the environment, or
cause complaint to the appropriate State or Local officials.
CERCLA Reportable Quantities: 100 lbs. (45.4 kg).
SECTION 7: HANDLING AND STORAGE
General Measures:
Keep away from heat, sparks or flame (avoid all ignition sources).
Store in a cool and well-ventilated area. Do not store above 38
0
C (100.4
0
F).
Keep container tightly closed
Do not generate dust.
Materials or Conditions to Avoid:
Contact with acids, and oxidizing agents.
Elevated temperatures. Do not store above 38
0
C (100.4
0
F).