Safety Precaution ............................................. 4 Using EMX-830 ................................................30 Product Features ...............................................6 Preparations.................................................30 Package Contents..............................................7 LCD Window ................................................31 In the package................................................7 Button Operation .....................................
● Keep any unused battery away from the children’s reach because it may pose choking hazard. Call for an immediate medical assistance when an unwanted incident happened. ● Do not drop or impact the unit. It may cause malfunctions. ● Do not press too hard on the transparent plastic cover of the LCD window. Pressing too hard may break the covering. ● Do not disassemble, place pressure to, short-circuit batteries or set them on fire. They may cause leak, heat, explosion or fire hazard.
Package Contents ■ In the package 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Lyrics Download(LDB) Lyrics Editing USB2.
Mic 1 Pull open the battery cover of EMX-830 2 Check if + and – poles of the battery are positioned correctly when replacing the battery.
Minimum PC requirements Pentium 133MHz or better Windows 98SE/ME/2000/XP 20MB or more storage space A CD-Rom drive A USB port ■ Installing EMX-830 software 1 Insert the installation CD and the following screen appears. 2 Select “Setup.Program” to begin the installation. Tip : ● For the Windows 98SE users, install the provided software for a USB connection. ● When USB is not working for any of Windows 98SE/ME/2000/XP systems, try to fix the problem by updating your Windows.
Press “Next” and the license agreement is displayed. 5 Choose the location of destination folder for the installation, and click “Next.” 4 Choose “Yes” if you agree with the terms of the license. 6 Click “Next” after you type the name for the installed software.
8 It would take a moment while the installation is progressing. 1 Insert the provided cable end to the USB port after pulling open the cover of the port. 2 The product works same as a removable disk when connected to a PC. Click on “Confirm” to finish when the installation is complete. Tip : ● Restart your computer when the software installation is for Windows 98SE/ME.
For users of Windows ME/2000/XP – To remove the product from a PC, click on “Unplug/eject” icon on the taskbar and wait until a message confirming your action appears. For users of Windows 98SE Removable disks operate the same way as floppy drives do. As demonstrated in the picture above, create as many folders as you like to carry music in them and enjoy the product’s folder function. Its booting speed will increase when you create “Data” folder and store files other than music files in the data folder.
1 2 Go to Options of the Tools menu. 3 Select the Device. Activate Media Player of Windows after EMX-830 and a PC link is established. EMX-830 USER’S MANUAL EMX-830 USER’S MANUAL 18 To configure options – To edit media information for WMA and MP3, set the Options as described below.
4 5 20 1 Link EMX-830 to a PC. 2 Choose Copy To CD or Device, and choose EMX-830 Series from the driver pull-down menu on the right pane. Select a Removable Disk(EMX-830) and click on the Property button. EMX-830 USER’S MANUAL EMX-830 USER’S MANUAL To convert and save music files. Move the slide to make a choice of appropriate audio quality, and click on “OK.
4 2 Activate Lyrics Management as described in the picture above. 3 Select a file and choose Marking from the top menu bar. Disconnect the product from the PC when copying is complete. ■ Downloading lyrics. Downloading Lyrics features of EMX-830 enables users to add lyrics to source tracks. With the help of Lyrics Management software to download from lyrics database, no hassle is needed.
After the successful lyric insertion, click “OK” to complete the operation ■ To search for the downloadable lyrics. 1 When corresponding lyrics don’t appear, refer to the download guide as described below. 2 In case fo no automatic serach result, select the file and choose Search. Tip : ● You can insert lyrics to multiple files by this operation. 5 After the successful lyric insertion, ‘EMX-830’ is displayed on the panel. Tip : ● Lyrics Management supports lyrics search for MP3 and WMA.
4 Enter the artist’s name and son’s titile in the Search window, and click on the Search button. 2 3 Look for the closest match with time information, artist and song’s title. Click Marking for the match and insertion. 4 ■ Lyric Editor 1 Select a file and choose Editor from the top menu bar. Select a line from the lyrics window and edit the text.
Tip : ● Lyrics Management is the registered trademark of Taylor Technology. ● To edit lyrics, use the lyrics editor available by www.noontang.com. ● Add the edited texts using “Noontang Lyrics Editor” to Lyrics Management which will produce an appropriate lyric. 6 7 28 Choose Search and the result will show on the right. Look for the closest match and click Marking to save in the product. ■ To format EMX-830 To delete all the contents in EMX-830, refer to the following guide.
Click on “Start” to begin formatting. Tip : ● Please be sure not to use the NTFS format, which may result in malfunction of the product. ● In Windows 98SE, no particular setting is necessary to format the product. ■ LCD Window MUSIC PAUSE MUSIC PLAYBACK Using EMX-830 ■ Preparations 1 ! * @ ( To optimize the performance of the product, following precautions should be considered. 30 # $ % ^ & 2 ) 3 EMX-830 USER’S MANUAL EMX-830 USER’S MANUAL 1 1.
Line-In RECORD READY VOICE PLAYBACK Line-In RECORDING 0 0 ! * @ ( * * ( ( # + FM SEEK FM PRESET 5 4 4 6 7 8 9 9 VOICE RECORDING FM RECORDING 0 0 * * ( ( No Description No 1 Folder 2 Description File Display 3 Mode/Playback Options 4 EQ/SRSWOW 5 Repeat Options 6 Hold 7 Battery Level 8 Bit Rate Repeat Section 9 Mp3.
Voice Pause In EMX-830, there are PAUSE, PLAYBACK, RECORD and FM modes. For each mode, the following table explains how to operate the buttons.
Playback Voice PLAYBACK CENTER JOG RIGHT JOG LEFT JOG UPPER JOG LOWER JOG MODE BUTTON RECORD Brief Press Hold Down Preset Mode To power off Next Preset Menu Options To change frequency To seek next available frequency To change frequency To seek next available frequency To increase volume To decrease volume To save on the preset Mode N/A To start/stop recording FM Preset (“P-set” is displayed on the LCD window) Playback Voice PLAYBACK CENTER JOG RIGHT JOG LEFT JOG UP JOG DOWN JOG MODE BUTTON RECORD Bri
Line-In Mode To turn off the power – Hold down on the Playback button 3 seconds or longer. To adjust volume – Press on the Up/Down button. Hold Function Mode Change (Music/Voice/FM/Line-In) 1 2 Hold down on the MODE button. In Mode options, use the left/right jog to move to your choice of mode and press on the Menu/Mode button to select. Music Mode Voice Mode – To prevent users from mistakenly pressing buttons. – When Hold is set, icon is displayed and no buttons will work.
To navigate within the playing track – Move and hold the left/right jog to navigate within the track. – The search speed will increase when the hold on the jog control maintained. To change the playing tracks 2 To open/close a folder – Press on the JOG button after a folder is selected. – Press briefly on the left/right jog and the following occurs. Left Jog Right Jog Control Point Within 5 sec. of playing Over 5 sec.
In VOICE mode, press and hold down on the Record button. Tip : * To finish recording, press on the Record button again. Tip : To play a recorded file in Voice mode. 1 In VOICE mode, press on the Repeat Section button to open the folder. 2 Select the file to play and press on the Playback button. * Repeat Section requires 3 seconds or more of a loop to repeat. ■ To change to VOICE Mode 1 Press and hold down on the Mode button until the Mode window appears. 2 Select VOICE.
* Reception in the area will determine MONO/STEREO automatically. To save the band frequency To tune in to a station, press on the Mode button and select FM. – Press briefly on the Central Jog to move up or down on the preset channels. In SEEK mode, Icon appears on the bottom of the LCD Band Scanning – Press Left/Right Jog briefly to navigate the band on a preset increment of 100Hz. – Hold down and release the Left/Right button, and the next available channel appear.
– In SEEK mode, press on the Playback button to change to PSET Mode. – Change to P-SET(icon will be displayed) mode. * In P-SET mode, you can tune in to one of the preset bands. To move between the preset channels. – Press on the Left/Right button to move between the channels. – Press on the Mode button and 16 stations that would be scanned will be saved. * Be sure to have the earphone connected to the set. To record FM stations Auto Scan – Auto Scan will allow the user to save up to 16 stations.
1 Hold on the Mode button to change to Line-In. To play a recorded file Record Ready 2 – Hold down on the Mode button to change to VOICE. 3 Line-In Recording In Line-In mode, hold down on the Record button. Files are saved in the Line-In folder of MUSIC. ■ To configure Menu – Select a file that has been previously saved in the FM folder. 1 ■ To change to Line-In Mode 2 3 Press on the Menu button. Move between the menus to select.
To choose from Play settings Summary of Menu functions Menu Playing Methods Equalizer SRS Labs WOW Repeat Brightness Light Time Backlight Color Record Scroll Speed Power Save Sleep File Delete Lyrics Options Track Information Language Selection Registration Exit Function To play music files programmed into a play list To configure the equalizer settings SRS WOW Configuration To set Repeat Section options To adjust the brightness of LCD To adjust the duration Backlight is remained on To select light source
● When there is no file to play for the M-Fold or M-File, “No Marked Files/Folder” message is displayed. ● When the marked file or folder is erased or more files are added, bookmark will be released. To set Bookmark for files and folders – To bookmark a file or a folder, press on the Record button after selecting the file or the folder. Bookmark released – Make the appropriate settings by adjusting SRS, Tru Bas, and SPK slides. • SRS – To create 3D sound effects.
EQ settings (WOW SRS is not activated) – To customize the tone settings by the user. – Use the menu and the left/right button to make the adjustment. Repeat Section – Repeat Section includes Single File Repeat/Repeat All/Random Playback/Random Repeat All/Repeat Off. Description User EQ settings – User EQ can be customized and output of a frequency bandwidth can also be adjusted for the appropriate tone settings.
– To adjust LCD contrast. Light Time – The duration that the backlight is remained turned on can be adjusted. Record Settings – To select the recording quality. Tip : ● The ASD setting applies to Line-In. Scroll Speed – Scroll speed sets the speed of text scrolled on the LCD window. To select the source of backlight. – Select the color of light source. Seven colors are available.
certain time period. Sleep – Sleep will turn off the power when the user-set period elapses. Use this when you are going to listen to radio or music for an extended period of time. – Use Lyrics Settings if you want to display the lyric that accompanies a music file. – Automatic Backlight is to turn on the backlight for the time when lyrics should be displayed. Tip : * The power goes off after a certain pre-determined period has passed.
– To exit the menu, choose the EXIT icon or hold down on the Menu button. Language Setting – To display the language of Menu and massages. Firmware Upgrade Choose Firmware Upgrade when there’s a new firmware upgrade released or EMX-830 doesn’t work properly. Registration Information – Registration Information will display the product’s model name, firmware ver. Notice : ● Disconnecting EMX-830 from a PC may result in a damage to the set. * Check our website for the new release of Firmware Upgarde.
Link the product to a PC using the provided USB cable. 2 Choose [Start] [Programs] [Firmware Update] When the driver installation is complete, the following window will appear. 5 When the upgrade is complete, disconnect the set from the PC. Refer to the “EMX-830 Safe Unplug/eject.” [EMX-830 ] Notice : 3 62 [MSC ] 4 For the users of Windows XP, choose “Automatic Software Installation” and click on the Next button. ● Do not disconnect the product from the PC while upgrade is in progress.
Model Memory File Support EMX-830 Series 128MB/256MB/512MB/1024MB MPEG 1/2/2.5 Layer 3(8~ 320kbps, VBR) WMA (5~192kbps) support Battery One AAA (1.5V) USB USB2.0 Playing Time About 20 hours LCD Graphic LCD (3Line) / EL Backlight Size 22 x 53 x 22mm Weight 22.4g S/N Ratio 90dB Earphone Output 10mW + 10mW (16Ω) FM Frequency 87.5~108MHz Recording VOICE / FM /Line-In Recording Language Multiple language support (Unicode 2.
Warranty Product VOICE RECORDER & MP3 PLAYER Model Assurance period 1. Refrain from using the earphone when you are biking or driving or walking (especially when crossing the street). Not doing so can result in a car accident. 2. Listening for too long at a loud volume can cause serious hearing problems. 3. Using a headphone/earphone while you are on the street can result in a car accident. 4. Do not drop or impact the unit. It may cause malfunctions. 5.
EMX-830 USER’S MANUAL EMX-830 USER’S MANUAL 69 68 MEMO MEMO