User's Manual

17
EN
Unlik
e QUICKSTART the satellite search will search the
whole satellite for channels and will not be instant.
Also the channels will appear in the order on the satellite
and not the pre-set order.
Auto search replaces any previous searched channels
with those of the new search. To add an extra satellite if
you have a suitable Dish/LNB/Switch you must use the
Dish Installation menu.
D
TV (DVBT) Manual Tuning
Y
ou can manually tune DTV channels in the TV SETTINGS
menu. Press the Left/Right arrow buttons to select the
channel you wish to tune, then press OK button to scan
for the channel.
You can manually tune CADTV channels in the TV SET-
TINGS menu.
Note: for more information about the channel parameters
(frequency, symbol rate and QAM type), please check with
your cable TV provider.
F
requency
Sel
ect Frequency using the
butt
ons.
Symbol (ks/s)
Sel
ect the Symbol (ks/s) using the
butt
ons.
QAM
Type
Sel
ect the QAM Type using the
butt
ons
A
TV (analogue cable TV) Manual Tuning
Y
ou can manually tune ATV channels in the TV SETTINGS
menu.
Stor
age to
Pr
ess the
butt
ons to change the numbered location
of the found channel.
Sys
tem
Sel
ect the system using the
butt
ons.
Curr
ent CH
Displays the curr
ent channel number, press the buttons
to choose the channel you wish to modify.
Sear
ch
Pr
ess the
butt
ons to scan through the frequencies to
ew channels.
Fine tune
In
case of bad reception, you can press the
butt
ons to
mak
s
tments to the tuning. After manual tun-
ing is complete, please press the RED button to save any
found channels.
Press
/ to sel
ect DVB Select type, Country and Tune
Type, press OK to start scanning.
If you select ATV+D
r
st 50% of the processing is
for ATV tuning, while the second 50% represent DTV tun-
ing. When ATV tuning, you can press MENU to Skip ATV
tuning and start DTV tuning or press EXIT to exit tuning.
During the channel search a preview of the already-found
channels is displayed.
C
ADTV (DVB-C) Manual Tuning