User's Manual
Table Of Contents
- 1 General description
- 2 Functional overview
- 2.1 Product description
- 2.2 Functional modes
- 2.3 Reporting interval
- 2.3.1 Energy considerations
- 2.3.2 Standard reporting interval
- 2.3.3 Illumination-controlled reporting interval
- 2.3.4 Temperature-controlled reporting interval
- 2.3.5 Humidity-controlled reporting interval
- 2.3.6 Acceleration-controlled reporting interval
- 2.3.7 Magnet contact sensor-controlled reporting interval
- 2.3.8 Arbitration between reporting intervals
- 3 Sensor functionality
- 4 Product interface
- 5 Radio communication
- 6 Security
- 7 Commissioning
- 8 NFC interface
- 9 NFC registers
- 9.1 NFC memory areas
- 9.2 Device identification NDEF
- 9.3 User information NDEF
- 9.4 NFC HEADER
- 9.5 CONFIGURATION
- 9.5.1 Using the NFC configuration functionality
- 9.5.2 CONFIGURATION area structure
- 9.5.3 NFC_PIN_CODE
- 9.5.4 PRODUCT_ID
- 9.5.5 USER_KEY
- 9.5.6 SECURITY_KEY_MODE
- 9.5.7 SECURITY_MODE
- 9.5.8 EEP
- 9.5.9 SIGNAL
- 9.5.10 LED_MODE
- 9.5.11 FUNCTIONAL_MODE
- 9.5.12 STANDARD_TX_INTERVAL
- 9.5.13 THRESHOLD_CFG1
- 9.5.14 THRESHOLD_CFG2
- 9.5.15 LIGHT_SENSOR_CFG
- 9.5.16 ACC_SENSOR_CFG
- 9.5.17 SOLAR_THRESHOLD
- 9.5.18 SOLAR_TX_INTERVAL
- 9.5.19 LIGHT_THRESHOLD
- 9.5.20 LIGHT_TX_INTERVAL
- 9.5.21 ACCELERATION_THRESHOLD
- 9.5.22 ACCELERATION_TX_INTERVAL
- 9.5.23 TEMPERATURE_THRESHOLD
- 9.5.24 TEMPERATURE_TX_INTERVAL
- 9.5.25 HUMIDITY_THRESHOLD
- 9.5.26 HUMIDITY_TX_INTERVAL
- 9.5.27 MAGNET_CONTACT_TX_INTERVAL
- 9.5.28 ILLUMINATION_TEST_RESULT
- 9.6 USER DATA
- 10 Mechanical interface
- 11 Installation recommendations
- 12 Regulatory notes
- 13 Product history
USER MANUAL
STM 550 / EMSI – ENOCEAN MULTISENSOR FOR IOT APPLICATIONS
© 2020 EnOcean | www.enocean.com F-710-017, V1.0 STM 550 / EMSI User Manual | v1.4 | November 2020 | Page 10/97
1.5 Packaging information
1.5.1 STM 550
STM 550 is delivered in a box of 100 units packed onto 10 trays of 10 units each.
Packaging Unit
100 units
Packaging Method
10 modules per tray, 10 trays per box
Tray Dimensions
205 mm x 166 mm x 20 mm
Box Dimensions
205 mm x 176 mm x 174 mm
1.5.2 STM 550 installation kit
The STM 550 installation kit consists of one box with 100 units STM 550 modules (as de-
scribed above) together with one box of 100 units of installation material.
Packaging Unit 100 units
Packaging Method 1 large outer box containing 2 smaller inner boxes
Inner box 1: 100 units STM 550B (same as above)
Inner box 2: 100 units installation material
Outer Box Dimensions 360 mm x 234 mm x 178 mm
Inner Box Dimensions 232 mm x 176 mm x 174 mm
1.5.3 EMSI
EMSI consists of one box with 10 single unit packages where each package contains one STM
550 module together with the installation material.
Packaging Unit Individual unit packaging
Individual Unit Dimensions 75 mm x 75 mm x 28 mm
Packaging Method 10 individual unit packages within one box
Box Dimensions 300 mm x 90 mm x 90 mm
1.6 Ordering information
Product
Type
Ordering Code
Frequency
STM 550
STM 550U
STM 550J
Module only
100 unit packaging
S6201-K516
S6251-K516
S6261-K516
868.300 MHz
902.875 MHz
928.350 MHz
STM 550 KIT
STM 550U KIT
STM 550J KIT
Module with installation material
100 unit packaging
B6201-K516
B6251-K516
B6261-K516
868.300 MHz
902.875 MHz
928.350 MHz
EMSI
EMSIU
EMSIJ
Module with installation material
Single unit packaging
E6201-K516
E6251-K516
E6261-K516
868.300 MHz
902.875 MHz
928.350 MHz