User's Manual

USER MANUAL 1.34

STM 300 / STM 300C / STM 300U

The user manual for the end product must also contain the text given above.

 Changes or modifications not expressly approved by EnOcean could void the user's au-

thority to operate the equipment.

 The module must be used with only the following approved antenna(s).

 The OEM must ensure that timing requirements according to 47 CFR 15.231(a-c) are

met.

 The OEM must sign the OEM Limited Modular Approval Agreement with EnOcean

5.3 IC (Industry Canada) Certification

In order to use EnOcean’s IC number, the OEM must ensure that the following conditions

are met:

 Labeling requirements for Industry Canada are similar to those required by the FCC.

The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements

are met. A clearly visible label on the outside of a non-removable part of the final prod-

uct must include the following text:

STM 300C:

Contains IC: 5713A-STM300C

Contient le module d'émission IC: 5713A-STM300C

STM 300U:

Contains IC: 5713A-STM300U

Contient le module d'émission IC: 5713A-STM300U

 The OEM must sign the OEM Limited Modular Approval Agreement with EnOcean

Pour utiliser le numéro IC EnOcean, le OEM doit s'assurer que les conditions suivantes sont

remplies:

 Les exigences d'étiquetage pour Industrie Canada sont similaires à ceux exigés par la

FCC. Le fabricant d'équipement d'origine (OEM) doit s'assurer que les exigences en

matière d'étiquetage IC sont réunies. Une étiquette clairement visible à l'extérieur d'une

partie non amovible du produit final doit contenir le texte suivant:

Part Number

Type

Gain

N.A.

Wire/Monopole

1.0 dBi

N.A.

Helical (for STM300U only)

1.0 dBi