User's Manual

USER MANUAL
PTM 535 / PTM 535U / PTM 535J ENOCEAN TRANSMITTER MODULE
© 2019 EnOcean | www.enocean.com F-710-017, V1.0 PTM 535 / 535J User Manual | v1.5 | September 2020 | Page 25/33
5.4 Layout recommendations
PTM 535 can be soldered onto a host PCB. Figure 16 below shows the required footprint
shape. EnOcean can provides Gerber data if required.
Figure 16 PCB footprint for PTM 535
Figure 17 below shows the required keep out area on a host PCB form PTM 535. No copper
surface area is allowed within this area.
Figure 17 Keep out area on host PCB for PTM 535
PTM 535
Antenna