User's Manual

Table Of Contents

USER MANUAL

PTM 535 / PTM 535U / PTM 535J – ENOCEAN TRANSMITTER MODULE

4 PTM 535 configuration

PTM 535 provides a configuration interface that can be used to configure certain device

parameters.

4.1 PTM 535 configuration parameters

The following parameters can be configured for PTM 535 (868.300 MHz):

◼ Content of the radio telegrams

This can be configured for each of the 32 possible input combination (A0, A1, B0,

B1, direction of ECO movement)

◼ Default operation mode

This can be standard (default) or enhanced security. Changing the mode is still pos-

sible using the HW mechanism described in chapter 3.3

◼ Secure teach-in telegram transmission

The secure teach-in telegram transmission can start only when the ECO 200 is

pressed, only when the ECO 200 is released or at any ECO 200 action (press or re-

lease)

◼ Number of secure subtelegrams

If PTM 535 is powered by an ECO 200 harvester and operating in enhanced security

mode then it will always transmit 2 subtelegrams.

If PTM 535 is powered by another energy source such as a battery and operating in

enhanced security mode, then it can be selected if it should transmit 2 or 3 subtele-

grams.

Note that configuration is currently only supported for PTM 535 (868.300 MHz).

Configuration of PTM 535U (902.875 MHz) and PTM 535J (928.350 MHz) is cur-

rently not supported.