User's Manual
Table Of Contents
- 1 General description
- 2 Functional description
- 3 Radio telegram format
- 4 PTM 535 configuration
- 5 Application information
- 6 Regulatory information
- 7 Product history
USER MANUAL
PTM 535 / PTM 535U / PTM 535J – ENOCEAN TRANSMITTER MODULE
© 2019 EnOcean | www.enocean.com F-710-017, V1.0 PTM 535 / 535J User Manual | v1.5 | September 2020 | Page 10/33
2.3 Interface pin layout
Figure 3 below shows the pin out and external interfaces of PTM 535 as seen from the top
(component side). Items marked in green are on the component side while items in grey
are on the bottom side.
In addition to the 16 boundary contacts, PTM 535 provides the following contact points:
◼ Meander contact A0
◼ Meander contact A1
◼ Connection for whip antenna RF_WHIP
◼ Footprint for LEARN button (VCC_MODE and SEC)
◼ AC1/AC2 power supply via ECO harvester (bottom)
Figure 3 – PTM 535 pin-out and external interfaces