User's Manual

USER MANUAL PREVIEW
PTM 535BZ – BLUETOOTH AND ZIGBEE GREEN POWER PUSHBUTTON TRANSMITTER
© 2022 EnOcean | www.enocean.com F-710-017, V1.0 PTM 535BZ User Manual | v1.2 | July 2021 | Page 65/121
5.7 NEW CONFIGURATION
The NEW CONFIGURATION area is used to update the configuration parameters used by
PTM 535BZ which are stored in the ACTIVE CONFIGURATION area. The structure of NEW
CONFIGURATION area is shown in Table 26 below.
NFC
Page
Content
Byte 0 Byte 1 Byte 2 Byte 3
0x50 REQUEST_TYPE
0x51 CONFIGURATION_SELECTION
0x52 REQUEST_AUTHENTICATION
0x53
0x54 INPUT_CONFIG RADIO_CONFIG
…
0x58 BLE_TX_CONFIG BLE_SEC_CONFIG BLE_MANUFACTURER_ID
0x59 BLE_SOURCE_ADDRESS
0x5A CH_REG1 CH_REG2 CH_REG3
0x5B
0x5C BLE_INPUT_STATUS_0 BLE_INPUT_STATUS_1 BLE_INPUT_STATUS_2 BLE_INPUT_STATUS_3
0x5D BLE_INPUT_STATUS_4 BLE_INPUT_STATUS_5 BLE_INPUT_STATUS_6 BLE_INPUT_STATUS_7
…
0x60 ZGP_TX_CONFIG ZGP_SEC_CONFIG ZGP_PROTOCOL_CONFIG
0x61 ZGP_SOURCE_ID
…
0x64 ZGP_COMMAND_0 ZGP_COMMAND_1 ZGP_COMMAND_2 ZGP_COMMAND_3
0x65 ZGP_COMMAND_4 ZGP_COMMAND_5 ZGP_COMMAND_6 ZGP_COMMAND_7
..
0x68
…
0x6B
SECURITY_KEY1 (128 Bit)
0x6C
SECURITY_KEY2 (128 Bit)
…
0x6F
0x70
SECURITY_KEY3 (128 Bit)
…
0x73
..
0x76 USER2_CONFIGURATION_OPTIONS
…
0x79 USER1_PIN
0x4D USER2_PIN
Table 26 – NEW CONFIGURATION area structure