User's Manual

USER MANUAL PREVIEW
PTM 535BZ – BLUETOOTH AND ZIGBEE GREEN POWER PUSHBUTTON TRANSMITTER
© 2022 EnOcean | www.enocean.com F-710-017, V1.0 PTM 535BZ User Manual | v1.2 | July 2021 | Page 49/121
5.6 ACTIVE CONFIGURATION
The ACTIVE CONFIGURATION area contains the currently active configuration settings and
PTM 535BZ operates according to the register values in this area. Updating the register values
is done via the Configuration Update process as described in Chapter 5.6.16.
The structure of ACTIVE CONFIGURATION area is shown in
Table 13 below.
NFC
Page
Content
Byte 0 Byte 1 Byte 2 Byte 3
0x2C INPUT_CONFIG RADIO_CONFIG
0x2D
0x2E
0x2F
0x30 BLE_TX_CONFIG BLE_SEC_CONFIG BLE_MANUFACTURER_ID
0x31 BLE_SOURCE_ADDRESS
0x32 CH_REG1 CH_REG2 CH_REG3
0x33
0x34 BLE_INPUT_STATUS_0 BLE_INPUT_STATUS_1 BLE_INPUT_STATUS_2 BLE_INPUT_STATUS_3
0x35 BLE_INPUT_STATUS_4 BLE_INPUT_STATUS_5 BLE_INPUT_STATUS_6 BLE_INPUT_STATUS_7
0x36
0x37
0x38 ZGP_TX_CONFIG ZGP_SEC_CONFIG ZGP_PROTOCOL_CONFIG
0x39 ZGP_SOURCE_ID
0x3A
0x3B
0x3C ZGP_COMMAND_0 ZGP_COMMAND_1 ZGP_COMMAND_2 ZGP_COMMAND_3
0x3D ZGP_COMMAND_4 ZGP_COMMAND_5 ZGP_COMMAND_6 ZGP_COMMAND_7
0x3E
0x3F
0x40
…
0x43
SECURITY_KEY1
0x44
0x45 USER1_CONFIGURATION_OPTIONS
0x46 USER2_CONFIGURATION_OPTIONS
0x47
0x48
0x49 USER1_PIN_HASH
0x4A USER2_PIN_HASH
0x4B
0x4C SEQUENCE_COUNTER
0x4D REQUEST_STATUS DEVICE_STATUS