User's Manual

USER MANUA

V0.8

PTM 33X / 33XC

4 AGENCY CERTIFICATIONS (in preparation)

The modules have been tested to fulfil the approval requirements for CE (PTM 33x) and

FCC/IC (PTM 33xC) based on the built-in firmware.

4.1 CE approval

The modules bear the EC conformity marking CE and conforms to the R&TTE EU-directive

on radio equipment. The assembly conforms to the European and national requirements of

electromagnetic compatibility. The conformity has been proven and the according docu-

mentation has been deposited at EnOcean. The modules can be operated without notifica-

tion and free of charge in the area of the European Union, and in Switzerland. The following

provisos apply:

• EnOcean RF modules must not be modified or used outside their specification

limits.

• EnOcean RF modules may only be used to transfer digital or digitized data.

Analog speech and/or music are not permitted.

• The final product incorporating EnOcean RF modules must itself meet the es-

sential requirement of the R&TTE Directive and a CE marking must be affixed

on the final product and on the sales packaging each. Operating instructions

containing a Declaration of Conformity has to be attached.

• If the transmitter is used according to the regulations of the 868.3 MHz band,

a so-called “Duty Cycle” of 1% per hour must not be exceeded. Permanent

transmitters such as radio earphones are not allowed.

• The module must be used with only the following approved antenna(s).

Type Parameter Value

Wire/Monopole at RF_WHIP Maximum gain 1.0 dBi

External antenna at RF_50 Antenna type Passive

Impedance ~50 Ohm

Maximum gain ≤ 0 dBd