User's Manual

USER MANUAL

PTM 210 / PTM 215 / PTM 215U / PTM 215J

DC Step code and later

REVISION HISTORY

The following major modifications and improvements have been made from the first version

of this document:

Major Changes

2.0

Update to modules with step code DC.

2.1

Update of certification numbers in US and Japan.

Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany

www.enocean.com, info@enocean.com, phone ++49 (89) 6734 6890

Important!

This information describes the type of component and shall not be considered as assured

characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry

and specifications are subject to change without notice. For the latest product specifications,

refer to the EnOcean website: http://www.enocean.com.

As far as patents or other rights of third parties are concerned, liability is only assumed for

devices, not for the described applications, processes and circuits.

EnOcean does not assume responsibility for use of devices described and limits its liability to

the replacement of devices determined to be defective due to workmanship. Devices or sys-

tems containing RF components must meet the essential requirements of the local legal au-

thorities.

The devices must not be used in any relation with equipment that supports, directly or indi-

rectly, human health or life or with applications that can result in danger for people, animals

or real value.

Components of the devices are considered and should be disposed of as hazardous waste.

Local government regulations are to be observed.

Packing: Please use the recycling operators known to you. By agreement we will take packing

material back if it is sorted. You must bear the costs of transport. For packing material that

is returned to us unsorted or that we are not obliged to accept, we shall have to invoice you

for any costs incurred.