User's Manual

USER MANUAL
PTM 215ZE – 2.4 GHz IEEE 802.15.4 Pushbutton Transmitter Module
© 2022 EnOcean | www.enocean.com F-710-017, V1.0 PTM 215ZE User Manual | v1.0 | March 2022 | Page 9/43
2.4 User Interface
PTM 215ZE devices provide four button contacts. They are grouped into two channels (Chan-
nel A and Channel B) each containing two button contacts (State O and State I).
The state of all four button contacts (pressed or not pressed) is transmitted together with a
unique device identification (32 Bit ZigBee Green Power Device ID) whenever the energy bow
is pushed or released.
Figure 4 below shows the arrangement of the four button contacts and their designation.
Figure 4 – Button contact designation
O
I
BA
CHANNEL
STATE
O
I
BA
CHANNEL
STATE