User's Manual
USER MANUAL
PTM 215ZE – 2.4 GHz IEEE 802.15.4 Pushbutton Transmitter Module
© 2022 EnOcean | www.enocean.com F-710-017, V1.0 PTM 215ZE User Manual | v1.0 | March 2022 | Page 35/43
7.3 Device Label
Each PTM 215ZE module contains a product label identifying key parameters such as manu-
facturing date, device ID and an optically readable code that can be used to automatically
scan device parameters as shown in Figure 23 below.
Figure 23 – PTM 215ZE device label
7.3.1.1 QR Code Format
The QR code used in the new product label encodes the product parameter according to the
ANSI/MH10.8.2-2013 industry standard. The QR code shown in Figure 23 above encodes the
following string:
30S01700100+Z0123456789ABCDEF0123456789ABCDEF+30PS3271-A215+2PDA03+S01432902018866
Table 3 below describes the ANSI/MH10.8.2 data identifiers used by the PTM 215B device
label and shows the interpretation of the data therein.
Identi-
fier
Length of data (excluding identifier)
Value
30S 8 characters Source Address (hex)
Z 32 characters Security Key (hex)
30P 10 characters Ordering Code (S3271-A215)
2P 4 characters Step Code - Revision (DA-03)
S 14 characters Serial Number
Table 3 – QR code format