Data Sheet

USER MANUAL
7th Floor, Huarong Building, Qiaolian East, Bulong Road,
Longgang District, 518129, Shenzhen, Guangdong, China
P. 0086-755-8920-5835 F. 0086-755-8980-5835-812
[e-mail] | www.glassouse.com | www.ennopro.com
SWITCH CONNECTION
1. Plug Puff Switch to Glassouse V1.2 or any 3.5mm jack adapted device via 3.5mm connector.
2. Adjust the position of Puff Switch wire until you feel comfortable enough to do puffing action.
3. Press the power button on your switch to activate Puff Switch. The LED light will flash. Press the power button
again to turn off your Puff Switch. The LED light will flash for three seconds.
LED SIGNALS
The LED light on Puff Switch tells you the sensitivity via blinking speeds. Press and hold power button for 3 seconds.
1. High Sensitivity - The LED light blinks nine times in fast speed.
2. Medium Sensitivity - The LED light blinks six times in medium speed.
3. Low Sensitivity - The LED light blinks three times in low speed.
GS02 - PUFF SWITCH
Lenght: 170mm x Width: 24.5mm x Thickness: 11mm
Weight: 11g
Cable Length: 110mm
Battery Type: CR1632 3V coin size battery
DEVICE
3.5MM JACK
MICROPHONE
SILICONE COVER