Use Instructions

3130
LB-0009ODF-007-00018-DES REV_03
7: Setting up MotionSense
®
FOR HEALTHCARE PROFESSIONALS ONLY
You should help your patient to set up MotionSense® and ensure they are
comfortable and able to use the system safely at home with the following steps.
Register your patient in OrthoLogIQ (OIQ) by:
• Adding new patient information
• Adding new case details
• Enabling MotionSense® for the patient
Once registration is complete, an email and sms
will be sent to the patient.
7a: Register patient and enable MotionSense
®
When introducing the patient to MotionSense®,
you should help them set up with the following
steps:
• Download the MotionSense® App from the
iOS or Android App Store, or follow the link
sent to the patient’s mobile phone
• Open the app, select ‘Set up your account’
and follow the instructions in the app to
create an account for the patient
• Login to the ‘Care Team Mode’ using your
OIQ account details
• Connect the sensors. You will need to enter
the Sensor ID and PIN during the connection
process
7b: Install app and connect sensors
Sensor ID PIN
Once registered, the app will prompt the patient
to wear their sensors. You should help the
patient by doing the following:
• Explain that the weekly skin patches attach
to the leg, and the daily sensor patches are
applied to the sensors
• Shaving any hair in the sensor
attachment area
• Follow steps 5d-5g to attach the weekly
skin patches to the aected leg, at least
a hand’s width distance away from the joint
center as shown
• Mark the location of the applied patches
with the skin marker included
• Explain that the weekly skin patches must
be replaced every week
7c: Apply the weekly skin patches
Page 31
Follow steps 3f-3k to apply the daily sensor
patches and attach the sensors.
• Explain that the sensors must be removed
every evening, charged overnight and
re-attached every morning as shown in
Section 3
7d: Apply the daily sensor patches and sensors
Continued overleaf...