User guide

MX48 C ONTROL ENMET Corporation
3
3.0 Installation
3.0 Installation3.0 Installation
3.0 Installation
3.1 Installation Recommendations
The MX48 C ONTROL can be installed anywhere away from an explosive atmosphere. It should preferably be located
in a ventilated area under surveillance such as a, guard post, control room, instrumentation room, etc.
N OTE : To be able to fully open the hinged front cover of the MX48 C ONTROL , allow space for opening by rotating the
cover 90 degrees upwards see Figure 1.
The MX48 C ONTROL is mounted on the wall with one bracket attached to the wall and the mating bracket is on the
back of the enclosure. See Figure 2
Figure 2: Mounting MX48 C ONTROL
19.75
″
12.50
″
3.75
″
.37
″
17.50
″
17.50
″
1.12″
1.12″
1.12″
3.56
″
.25
″
.25
″
16.12
″
16.12
″
4.93
″
.62
″
8.87
″
.5
″
.31
″
Mounting
Bracket
Mounting Bracket
Front ViewFront View
Back View