Users Manual Part 1

6
Tikee overview
2. Tikee overview
Buttons
Power button
• 3-second press : turn on your Tikee
• Single press while the Tikee is on : display the battery level (see below the Power LED section)
• 3-second press : turn off your Tikee
Trigger button
• Single press : starts a shooting sequence (previously set up)
• 3-second press : stop shooting
Power connectors
1. MicroUSB connector
This connector is used notably for the Tikee’s first charge.
Caution: when plugged in, this connector is not waterproof.
2. External power connector
Only present on the Tikee 3PRO+, it is used to connect the Enlaps external solar panel (not sup-
plied with the camera). This connector is waterproof, so it can be used outdoors.
Snap-in connector, pull to disconnect.
When not in use, re-insert the plug.
Caution : For your safety and the safety of the camera, do not plug other devices than those
provided by Enlaps into this connector.
Enlaps cannot be held responsible for any damage that may result from the misuse of this
connector.
1
2