Users Manual Part 1

5
Introduction
First charge of the device
Caution : For an optimal use of your Tikee/TikeePRO, you have to fully charge the battery
before its first use.
Plug a USB cable (not provided) into your Tikee into the dedicated USB slot.
Make sure that the logo is facing down to avoid damaging the USB slot.
Plug the other end of the USB cable into a power adapter (not supplied), and
then into a power outlet.
Note : the first charge may require up to 48 hours. When charging is complete,
the LED power turns blue. (You can monitor the Tikee’s battery level on on the
mobile application. See page 14)
Note : the waterproofness of your Tikee is not guaranteed when the USB cable is plugged into
the USB slot.
Note : If an external power source is used, be sure that the voltage is 5V and that the delivered
current is more than 1A.
Downloading the mobile app Tikee Remote
Tikee Remote is the essential mobile application for your Tikee. You can control it
and set timelapses with your personal settings.
This mobile application is required to set up your Tikee.
Smartphone compatibility: Bluetooth 4.1 and +.
Android version 6 and up or iOS 10 and up.